145.02 incl btw

Op voorraad

Op voorraad

Artikelnummer: RAM-HOL-UN9U Categorie:


RAM-HOL-UN9U bestaat uit een composiet veerhouder, verstelbare grip armen en extra bodem ondersteuning. Inbegrepen zijn extra gemakkelijk grip knoppen, op de achterkant van de houder voor quick release van het tablet. De RAM-HOL-UN9U rekt uit en krimpt voor een perfecte pasvorm van de meeste 10 “tabletten met of zonder hoes (ook b.v. Otterbox en Griffin), evenals een aantal kleinere tabletten. U kunt hieronder controleren of afmetingen van het tablet compatible zijn met de X-Grip™.
The new RAM X-Grip line of products just got bigger and better. This new model is just what you’ve been looking for to hold your favorite tablet. Just like the devices it was made for, it is everything you need and nothing you don’t. Simple to open and close, the spring loaded RAM X-Grip III™ leaves the outside edge of your tablet almost completely free of annoying obstructions. Soft rubber fingers apply just enough force to keep your tablet in safe and secure. Compatible with a wide range of mounting solutions, your tablet is sure to find a home no matter where your travels take you.
The RAM-HOL-UN9U consists of a composite spring loaded cradle, expandable grip arms and additional bottom support keeper. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The RAM-HOL-UN9U expands and contracts for perfect fit of most 10″ tablets with or without sleeves, as well as some smaller tablets. Please verify dimensions of your tablet below for compatibility with the X-Grip®.
Compatible Devices (WITH OR WITHOUT CASE):
Apple iPad Air 1/2
Apple iPad 4 (With Lightning Connector)
Apple iPad 3
Apple iPad 2
Apple iPad 1
HP TouchPad
Asus EEE Pad
Asus Eee Pad Transformer
Samsung Galaxy Tab 8.9
Samsung Galaxy Tab 10.1 2014
Samsung Galaxy Tab 2/3/4 10.1
Samsung Galaxy Tab A 9.7
Samsung Galaxy Tab S 10.5
Samsung Galaxy Tab S2 9.7
Most 10″ Screen Tablets
All devices that maintain the following dimensions below:
Holder Dimensions:
Minimum Width = 6.25″ (15,9 cm)
Maximum Width = 8.1″ (20.6 cm)
Depth = 0.875″ (2,2 cm)
Maximum Length (using additional side supports) = 10.25″ – (26.04 cm)
1. Spring loaded holder expands and contracts for perfect fit of your tablet
2. Rubber coated tips will hold your tablet firm and stable
3. Versatility of holder allows for attachment to many 1″ socket mounts
4. Socket technology allows for multiple adjustment angles and articulation of your tablet
5. Easy access grip knobs, located on the back of the holder for quick release of your tablet
6. Multiple mounting access points on the back of the holder
7. Additional support keeper at the bottom of the holder
8. Will not interfere with electronic ports, speakers and camera
High Strength Composite with Rubber Tips
Dit is alleen de houder voor de montage aan andere RAM parts heeft u een RAM-B-202U B-kogel nodig.

Geschikt voor:

Extra informatie

EAN code



Er zijn nog geen beoordelingen.

Wees de eerste om “RAM X-GRIP UNIVERSAL 10″ TABLET HOLDER” te beoordelen

Het e-mailadres wordt niet gepubliceerd. Vereiste velden zijn gemarkeerd met *